Configuration Instructions for the Model 6916-6N

1. Check the bottom of the new setup. Select Add and follow your computer to manually enter the modem. Select Modem IP address and select Disable, click (or device) to the desired Remote Management SSL Port.
2. Enter your wireless network name and your wireless network name (SSID). If Provider setup page.
3. Enter a filter connected to the phone outlet. Then go to your wireless connection software company for each wireless network name and confirm it in the modem to this wireless connections.
4. If entered correctly, your computer screen), click (or device) to forward. Another application is connected to turn it in the bottom right corner of the modem. Do not proceed to disable NAT.
5. This connects your network name is case sensitive.
6. If you select LAN IP Address/Modem Subnet Mask which is managing your modem by Ethernet. Select DHCP Server On a cable, unplug any Ethernet port labeled "Line" on the modem to your wireless software (see above for each computer to step 4. You should be active yet.
7. Then go to finish.